ElastaSeal

The Use of ElastaSeal to seal the chimney section of the manholes will provide an arresting factor to Inflow and Infiltration problems. ElastaSeal is an aromatic urethane rubber. Urethane's are noted for extreme toughness, elongation, abrasion resistance, acidic resistance and longevity. The ElastaSeal process allows a fast and simple method of sealing the adjustment ring area and joint sections on any concrete structure. When ElastaSeal is properly installed; the adjustment ring areas and joint sections will not allow rainfall inflow and will not deteriorate from hydrogen sulfide, salt water or detergents. ElastaSeal will also increase the structural integrity of the manhole chimney, which may erode due to acidic gases in the environment. These gases take a major toll on cementitious products used in manhole chimneys. The bonding strength of ElastaSeal is unequaled by any other product provided in this market. When used to prevent the failure of the joint between the frame and manhole liner (calcium aluminate, fiber glass, epoxy or others) the 800% elongation provided by ElastaSeal is the perfect answer. This elongation will not allow the chimney to crack between the frame and adjustment rings due to ground movement, traffic vibration or thermo variations. When this crack is prevented, gases are not allowed to get behind the liner, deteriorate receives the full life and benefits of the liner installed. ElastaSeal is an inexpensive and permanent method of sealing the grade adjustment ring area and joint sections in manholes without excavation. ElastaSeal will conform to any manhole shape without regard to irregular configuration, angles ( to any degree/vertical or horizontal), and/or voids. Installation of ElastaSeal coatings are performed by our company trained and certified application staff. Click on the links below to learn more about this product.